Tips to use:
Applicable to: concrete, photographic paper, felt, glass, rubber, wood, cork, plastic, leather, MDF, metal, foam sheets, paper, papier-mâché, cardboard / carton, terracotta / clay, textiles / fabrics.
Apply with: glue gun.
Preparations: The substrate should be clean, dry, grease-free and dust-free. If possible, roughen smooth surfaces beforehand. This helps the glue to adhere to the workpiece.
Processing of material: The glue stick is inserted into the opening provided in the glue gun. Heat up the glue gun. When sufficient temperature is reached, the glue can be applied with the glue gun. Due to the rapid cooling of the liquefied adhesive, simple glue guns only can be used to apply glue to small areas. On materials with good thermal conductivity, the adhesive solidifies much faster than on paper, plastics or wood. When bonding objects made of materials with good thermal conductivity such as metal, stone or glass, it is advisable to preheat them. This improves the adhesion of the adhesive and allows a longer working time.
Time to dry : approx. 4 minutes.
This is to be noted: Adhesive and glue guns heat up during operation, especially in the front area near the nozzle, so that skin contact may cause burns.
Age recommendation: There is no age recommendation
Applicable to: Photo paper, MDF, Paper mache, Cardboard / carton, Terracotta / Clay, Textiles / Fabrics
Scope of application: Inside
To be applied with: hot glue gun
Length: 100 mm
Diameter (outside): 7 mm
Content: 12 pieces
Melting point: 160 - 165
Drying time: 4 min