www.vbs-hobby.com 
Exclusive offers
Glass mosaic adhesive
Solvent-free; Content: 100 ml
Description
The transparent, viscous glass mosaic adhesive is particularly suitable for vertical vessels that are to be covered with mosaic.
After completion of the mosaic, the adhesive needs approx. 6-8 hours to harden. If you want it to be quicker, the adhesive can also be baked in the oven at 80°C for 30 minutes.
Tips to use:
Preparations: The substrate should be clean, dry, dust and solid free. Processing of material: Apply a thin layer of adhesive to the surface and allow to flash off for 10 minutes. Then press the mosaic stones firmly into place. The mosaic stones can then be repositioned for a short time.
Time to dry: Air drying. Bake in the oven at 80 °C only 30 minutes. Work to finish: To fill the joints, apply the appropriate joint filler to the work and spread it into the joints with a soft spatula. Then remove excess joint filler with a damp cloth and clean the mosaic stones.
This is to be noted: Secure bonding even on vertical surfaces.
Notices under the CLP Regulation
- H315 - Causes skin irritation.
- H319 - Causes serious eye irritation.
- Attention
