www.vbs-hobby.com 
Exclusive offers
Glass mosaic adhesive, 50ml
Inhalt: 50 ml, Lösungsmittelfrei, Auftrocknung: transparent, Trocknungszeit: 6-8 hours
Article number 110 877 Available
Payment by Credit Card
Secure order
Easy return shipment
Description
The transparent, viscous glass mosaic adhesive is particularly suitable for vertical vessels that are to be covered with mosaic.
After completion of the mosaic, the adhesive needs approx. 8-10 hours to harden. If you want it to be quicker, the adhesive can also be baked in the oven at 80°C for 30 minutes.
For beautiful handicrafts with mosaic stones
After completion of the mosaic, the adhesive needs approx. 8-10 hours to harden. If you want it to be quicker, the adhesive can also be baked in the oven at 80°C for 30 minutes.
For beautiful handicrafts with mosaic stones
Tips to use:
Applicable to: Glass, plastic, almost all surfaces.
Apply with: Brush, liner vials / Tube.
Preparations: The surface should be clean, dry, dust and solid free.
Processing of material: Apply a thin layer of adhesive to the surface and allow to flash off for 10 minutes. Then press the mosaic stones firmly into place. The mosaic stones can then be repositioned for a short time.
Time to dry: Air dry for 6-8 hours. In the oven at 80 °C only 30 minutes.
Work to finish: To fill the joints, apply the appropriate joint filler to the work and spread it into the joints with a soft spatula. Then remove excess joint filler with a damp cloth and clean the mosaic stones.
This is to be noted: Secure bonding even on vertical surfaces.
Applicable to: Glass, plastic, almost all surfaces.
Apply with: Brush, liner vials / Tube.
Preparations: The surface should be clean, dry, dust and solid free.
Processing of material: Apply a thin layer of adhesive to the surface and allow to flash off for 10 minutes. Then press the mosaic stones firmly into place. The mosaic stones can then be repositioned for a short time.
Time to dry: Air dry for 6-8 hours. In the oven at 80 °C only 30 minutes.
Work to finish: To fill the joints, apply the appropriate joint filler to the work and spread it into the joints with a soft spatula. Then remove excess joint filler with a damp cloth and clean the mosaic stones.
This is to be noted: Secure bonding even on vertical surfaces.
Content: 50 ml
Solvent-free:
Finish: transparent
Field of application: Inside
Drying time: 6-8 hours
Notices under the CLP Regulation
Attention
- H315 - Causes skin irritation.
- H315, H319
Ratings
ideas & instructions
There are no ideas & instructions for this article yet.
Customers who bought this article have also purchased the following articles:
