The bird bath can be
covered with small mosaic tiles according to your personal taste: each tile is positioned individually and the tiles are fixed to the bottom of the bird bath with mosaic glue.
In the next step the
Joint Filler "washed away." For this the Joint Filler is stirred into the appropriate quantity of water and distributed over the mosaic picture with a Bristle brushes . It is important that the mass fills up all spaces between the mosaic stones. When the Joint Filler has dried, the mosaic can be carefully wiped with a damp sponge.
After 24 hours drying time, the stones can be wiped again with a damp cloth and polished with a soft cloth.
So that you can also fill the bird bath with water, you should seal the mosaic surface or the inner surface of the bath with
cold glaze (casting resin). The cold glaze pack consists of 2 components, casting resin and hardener. Mix them in a 1:1 ratio according to the product instructions and then pour the transparent glaze onto the surface. Once this is thoroughly dry (takes about 1 day!), it is waterproof, scratch and abrasion resistant.
