Marabu YONO Marker Set "ADVANCED"
Line width: 1.5 - 3 mm; Replaceable tip; Content: 12 pieces
All prices plus shipping
Description
Not ALL YOU NEED IS LOVE, but YOU ONLY NEED ONE is the motto of the new Marabu YONO acrylic marker - but you will love it.
Because you will find that it is the only one you will need to paint, write, draw or design on almost any surface. The YONO has a replaceable, high-quality Japanese bullet tip with a line width of 1.5 - 3 mm. The lightfast, brilliant colours are water-based and dry opaque and matt.
The comprehensive Marabu YONO marker-set "ADVANCED" contains 12 marker in the following shades: yellow, orange, cherry, magenta, pastel blue, dark blue, reseda, sap green, brown, grey, white and black.
On absorbent surfaces your artwork will last for eternity, but on non-absorbent surfaces such as porcelain, acrylic glass or glass the paint can simply be wiped off again with a damp cloth to make new room for creativity. For better durability of the paint or for outdoor use, objects should be covered with a selected clear varnish . To ensure that the paint adheres permanently to textiles, the fabric must be fixed in the oven at 150 °C for 8 minutes.
No matter which painting techniques you prefer or would like to try out something new, the YONO acrylic marker is always with you, because as the name says YOU ONLY NEED ONE:
PAINT OVER:
1. Paint your motif, no matter what colour.
2. Let the paint dry.
3. Just paint over it, no matter what colour. Your YONO will cover it.
LIKE WATERCOLOUR:
1. Fill the marker tip full of paint.
2. Apply the paint to the background.
3. Blend the colors with a wet brush to create watercolor gradients.
BLEND IT / MIX IT:
1. Apply several colors next to each other.
2. Take a brush or sponge and blend the wet colors together.
3. Or paint the colors directly into each other to create shades.
MAKE BLOBS:
1. Fill the marker tip full of color.
2. Blow hard against the tip or flick your finger against the marker.
3. Add randomness and dynamism to your work with splashes and blobs.
Tips to use:
Applicable to: Almost all surfaces.
Apply with: Pen / marker.
Preparations: Before first use, shake the marker with the cap closed for 60 seconds until the mixing ball makes a distinct clacking sound. Slowly press (pump) the tip several times on a piece of test paper until ink is visible in the tip. When the ink flow is activated, the tip will slowly fill up. To test, the marker should be written on the test paper. Processing of material: The marker can be used for a variety of techniques. To ensure an even and consistent ink application, pump regularly.
Time to dry: Varies depending on the substrate/application.
Work to finish: For longer lasting colours, overcoat artwork with clear varnish. Fix fabrics in oven at 150 °C for 8 minutes.
This is to be noted: Before putting the marker away, close it with the cap with a clearly audible click. For long and perfect painting fun, the marker should always be stored horizontally.
Notices under the CLP Regulation
- not subject to classification/labelling