The 5-piece set KREUL "Glass & Porcelain Pen - Glitter" contains the colours Red, Blue, Light green, Sun yellow and Anthracite. the line width of the pens is about 1-3 mm. The semi-transparent, water-based pens are particularly suitable for painting glass objects. They can also be used for porcelain, metal and glazed ceramic goods.
Before use, shake the pencil for 1-2 minutes and then Paper push/pump with the tip until the colour becomes visible. The chosen object should be cleaned from dust and grease residues before use. Afterwards the motif can be painted on. When it is finished, the whole thing must dry for four hours. Then bake for 30 minutes in a non-preheated oven at 160 °C. Now only let it cool down well in the oven. After firing, the paint is dishwasher safe.
Tip:
If the tableware is not used for decoration, it is recommended not to paint the dining area. Please use only heat-resistant material.
Tips to use:
Applicable to: Glass, ceramics, metal, porcelain.
Apply with: Liner vials / pen.
Preparations: Before each use, shake the pen well for 1-2 minutes with the cap closed. Then pump the pen by carefully pressing it onto a sheet of paper several times until the paint has run into dosing tip. The surface must be clean and free of dust and grease so that the paint adheres to the smooth and non-absorbent material.
Processing of material: Apply the desired motif or lettering to the surface with the prepared pen. As long as the ink has not been burnt in, it can be removed again with water. This makes it easy to make corrections.
Time to dry: 4 hours.
Work to finish: To burn in the paint, place the painted object in a cold oven and only then heat the oven to 160 °C. Hold thempertaur for 30 minutes to bake the paint into the material. Turn off the oven and let the item cool and harden in the oven.
This is to be noted: When painting crockery, plates, cups or glasses, keep away from the eating area, as the paint is not food safe after baking.