www.vbs-hobby.com 
Exclusive offersTontöpfe mit der Cricut Joy gestalten
Instructions No. 3027 Instructions No. 3027 Difficulty: Beginner Working time: 2 Hours
Ces pots en terre cuite arborant chacun une partie de l’inscription « Let it grow » ont fière allure. Ils sont l’illustration parfaite de la rapidité et de la facilité avec lesquelles il est possible de réaliser des idées créatives avec une machine Cricut Joy.
Découvrez vite comment faire…
This is how you design the terracotta pots:
First coat the terracotta pots with clay sealant. This prevents moisture from seeping out and discolouring the acrylic paint. Once the clay sealant has dried, you can paint the terracotta pots with the craft paint of your choice. Apply 2-3 coats of paint so that the colour covers the terracotta surface well.
Plotting:
Download the JPEG file and open it in Cricut Design Space. Follow the programme's instructions to cut out the words.
The following instructions refer to the use of a PC with a Windows operating system. For mobile devices and other operating systems, the arrangement of the buttons may differ. The names remain the same.
1. Open the Cricut Design Space app.
2. Click on the three horizontal lines at the top left and go to "Workspace". You will now see the work mat on your screen.
3. Select any font and also the size of the font. You can set the font size at the top of the bar or drag the text field larger - hold down the "Ctrl" key to enlarge the field evenly.
4. Select your text fields and click on "Mirror" - "Mirror horizontally" at the top of the bar.
5. Then go to "Create" at the top right and select the mat and mat length immediately afterwards.
6. Finally arrange your fonts on the mat view.
7. Cut your iron-on films to size and place them on the mat with the shiny side facing down.
8. Connect your plotter and insert the mat.
9. Click on "Continue".
10. Follow the plotter's instructions, insert the mat and start the plotting process. Cut the film to the size of the mat and start the plotting process.
Remove the film around the words so that only the words are left on the backing film. Stick the transfer film over it. Then peel off the backing film and stick the words with the transfer film onto the terracotta pots. Now you can also remove this film, done.
If you don't have a plotter machine, you can also print out the templates as a PDF file, transfer them manually onto the vinyl film with a pencil and cut out the lettering.
Plotting:
Download the JPEG file and open it in Cricut Design Space. Follow the programme's instructions to cut out the words.
The following instructions refer to the use of a PC with a Windows operating system. For mobile devices and other operating systems, the arrangement of the buttons may differ. The names remain the same.
1. Open the Cricut Design Space app.
2. Click on the three horizontal lines at the top left and go to "Workspace". You will now see the work mat on your screen.
3. Select any font and also the size of the font. You can set the font size at the top of the bar or drag the text field larger - hold down the "Ctrl" key to enlarge the field evenly.
4. Select your text fields and click on "Mirror" - "Mirror horizontally" at the top of the bar.
5. Then go to "Create" at the top right and select the mat and mat length immediately afterwards.
6. Finally arrange your fonts on the mat view.
7. Cut your iron-on films to size and place them on the mat with the shiny side facing down.
8. Connect your plotter and insert the mat.
9. Click on "Continue".
10. Follow the plotter's instructions, insert the mat and start the plotting process. Cut the film to the size of the mat and start the plotting process.
Remove the film around the words so that only the words are left on the backing film. Stick the transfer film over it. Then peel off the backing film and stick the words with the transfer film onto the terracotta pots. Now you can also remove this film, done.
If you don't have a plotter machine, you can also print out the templates as a PDF file, transfer them manually onto the vinyl film with a pencil and cut out the lettering.
